SELFLOK VGROOVE 150MM NATURAL 300MM X 3660MM WTEX 450150

Weathertex Selflok V-Groove Natural unprimed weatherboards retain the characteristics and look of raw, undressed timber. The surface is pressed to create a woodgrain effect, with the rough deep-cut pattern exhibiting all the knots, cracks and imperfections found in natural timber. When oiled, the appearance of fresh brown timber results, and when allowed to weather naturally, the depth of colour will vary (subject to location and sun exposure).

With a super simple self-locking system that aligns every V-Groove Natural board perfectly, installation time is drastically reduced. Precise routing produces a distinctive ship-lapped profile which has become an all-time Weathertex classic. When installed with the concealed joining system, the seamless lines of Selflok V-Groove Natural weatherboards deliver an unspoiled and authentic result.

Weathertex lightweight, natural timber exterior wall cladding systems are manufactured in NSW using an exclusive process found nowhere else in the world, so these weatherboards and architectural panels occupy a unique position in the marketplace. Hardwood timber is chipped, pulped and pressed with 3% natural wax to produce manufactured timber products that are altogether natural – no chemical additives.

Weathertex is made from PEFC certified state forest or private hardwoods from controlled sources, and leaves a better than zero carbon footprint on the environment. Having gone through a rigorous evaluation process to determine their “green performance”, Weathertex offer the very first manufactured product to receive Platinum GreenTag™ certification worldwide.

Weathertex Selflok V-Groove Natural weatherboards can be used both internally and as an external wall cladding in bushfire attack levels up to and including BAL 19 construction.

• 300mm x 9.5mm x 3660mm
• 150mm v-groove spacing
• Unprimed woodgrain finish
• 100% natural product – 97% natural timber and 3% natural wax
• Longevity – natural Australian timber, made to last
• Easy to install – unique ‘Selflok’ in-built lapping system, fix directly to frame, no silicones or adhesives required
• Easy to work with – lightweight, no special tools required
• Low maintenance – on average, repainting is required every 15 years
• Safe – can be sawn or cut indoors
• Termite Resistant – sugars and starches are removed
• Sustainable – PEFC certified, GreenTag™ certified, a better than zero carbon footprint
• Reliable – award-winning brand, highly trusted in the architecture, building, construction and design industries
• Bushfire attack level rated – BAL 19
• Warranty – guaranteed not to rot, split or crack for up to 10 years
• Australian made and owned – Hunter Region, NSW

Here’s some short videos to assist you with the installation of Weathertex products, follow these links:

https://www.youtube.com/watch?v=L0GSjgzPsv8 

 https://www.youtube.com/watch?v=swOyHMbkj6g

However, always refer to the Installation Manual for full information.