TILED ROOF VENT KIT 125MM X 150MM

This new range of premium roof kits is ideal for venting either 125mm or 150mm exhaust fans or rangehoods through a metal or tiled roof. Kits are ideal for bushfire zones. The contemporary looking cowl contains mesh (to protect from insects and pests) and is rated BAL-40 and the flashing is rated BAL-12.5. Kits contain all of the components for most installations – although an additional length of ducting (plus duct connecter/joiner) may be required in double storey homes. Kits are in 150mm diameter – but easily convert back to 125mm applications using the adapter.

Kit Contents:

• 150mm Roof cowl with steel mesh (BAL-40 compliant)
• 600mm x 150mm Steel clip seam pipe
• Roof flashing (BAL 12.5 tested) - tiled or metal version
• 3m of 150mm semi rigid ducting + 150mm Ceiling/wall ring
• 125-150mm adapter
• 2 x 150mm steel clamps
• 1 x 125mm steel clamp
• 48mm x 30m duct tape
• Bracing strap

Key Features:

• Compliant with the fire rating requirements of AS3959-2009 up to BAL-12.5
• Contemporary BAL-40 cowl with mesh to protect from insects and pests
• 150mm ducting converts to 125mm applications with adapter (if required)
• Contains all components to suit most installations
• Ducting complies with AS/NZS 4254.1 and 1668
• For tiled roofs