THERMAFLASH WINDOW FLASHING TAPE 75MM X 23M
PER : PER ROLL
Code
THEFLASH075023
Key Features:
- Synthetic backing and adhesive.
- Thermaflash can be used with either a taped corner or Thermakraft Corner Moulds (optional).
- Thermaflash is compatible with Thermakraft building membranes.
- Unaffected by LOSP or other solvent based treated timber. However, LOSP or other solvent based treated timber must have sufficient time for the solvent chemical to flash off in a well ventilated area. Recommended minimum 7 days.
Stock Availability
Product Description
Thermaflash is a high performance self-adhering window flashing tape. The advanced adhesive technology provides a high strength bond to most building surfaces and wall underlays. It is suitable for window and door installation as well as other wall penetrations. Thermaflash can be installed in a wide range of temperatures and can withstand UV exposure for up to 180 days.
Thermaflash window flashing tape can be used as a flexible flashing system around window and door joinery openings on timber and steel framed buildings within the following scope:
- Installed into and around joinery openings over the wall membrane and exposed frame to cover both the face and edge of the opening as a secondary weather resistant barrier.
- Installed at joinery heads to seal flashing upstands to the wall membrane.
- To assist the overall weathertightness performance of window and door joinery installations.
- To be used in conjunction with air seals and joinery flashing systems. Installer must check for air seal product compatibility with Thermaflash.