SIKAFLEX PRO 600ML SANDSTONE
Features & Benefits
- Movement capability of ± 25 (ASTM C 719)
- Good workability
- Good adhesion to many substrates
A multi-purpose and highly-flexible polyurethane sealant, Sikaflex® PRO offers excellent adhesion to all cement-based materials, brickwork, ceramics, polyurethane, epoxy, most polyester, most metals and most timbers.
Remaining permanently flexible, Sikaflex® PRO is a low VOC, environmentally friendly formulation that is non-corrosive and approved for use in drinking water applications. The cured product can be cut, sanded and painted, so perfectly lends itself to architectural projects.
High performance Sikaflex® PRO elastic joint sealer requires no mixing, it’s ready for immediate use and has a short skinning time. Suitable for above or below ground use, the non-sag formula accommodates vertical and soffit joints up to 30mm in width, offering high durability and good weathering resistance.
Potential uses for Sikaflex® PRO sealant include expansion joints, construction joints, joints in precast concrete, external walling and cladding joints, infill panel joints, curtain walling, sanitary installations, sealing around window and door frames, draught-proofing, sealing around duct and pipe penetrations in walls or floors, retaining walls, and sealing joints in water reservoirs.
- Multi-purpose, highly flexible polyurethane joint sealant
- Remains permanently flexible
- Excellent adhesion to common construction materials
- Outstanding durability and weathering resistance
- Non-sag in vertical or soffit joints (up to 30mm wide)
- Cuttable, sandable and paintable
- Low VOC, non-corrosive, environmentally friendly formulation
- Approved for use in potable water (drinking water)
- No mixing required, ready for immediate use
- Recommended clean-up using Sika Colma Cleaner
- Resistant to bacterial attack
- Approximately 2 to 4 hours skinning time
- Approximate cure rate of 2mm in the first 24 hours
- Sandstone in colour
- 600ml sausage