PRYDA STUD TIE 400 X 25MM / 90MM TIMBER
PER : EACH
Code
ST4U90
Key Benefits
- Greater tie-down strength
- Far stronger than relying on the withdrawal strength of common nails in end grain.
- No splitting of the timber.
Stock Availability
Product Description
Pryda Stud Ties greatly improve the jointing of top and bottom plates to studs compared to the common nail fixing. Stud Tie nails are driven into the side grain of the stud to resist wind uplift in lateral shear. This is far stronger than relying on the withdrawal strength of common nails in end grain. With Stud Ties, the careful location of the nails away from timber ends and edges avoids splitting which can occur in common nails only joints, especially in some timbers and particularly with skew nailing. This is not only unsightly, but it reduces the strength of the joint substantially. For application and design capacity information, refer to the Pryda Connectors & Tie Down Connectors Guide.
Key Features:
- Greater tie-down strength
- No splitting of the timber
- In-built nails, there is no need for other nails.
- Quick and easy to apply; the in-built nails are readily driven home with a conventional hammer.
- ST4U90 Stud Ties haS two bends for easy installation 90mm wall frames.
- Complies with AS1684 Bracing Units rules.