Your client makes a big investment when they decide to install a timber deck, this is why it's important that the right product is applied to enhance and protect their investment. Choosing the oil that goes on the timber decking will help make your job look good for as long as possible.
CUTEK® has a 30-year track record as innovators in the timber protection and pre-oiling markets across five continents. Their timber oils are independently tested and proven to offer powerful, long-term protection and dimensional stability improvements that stand-up in the most extreme environments. Beyond the protection characteristics, CUTEK® timber oils enhance, rather than obscure, the natural grain and beauty of wood.
SUPERIOR PENETRATION WITH SELF-HEALING EFFECT
CUTEK® wood finishes work differently to traditional wood stain, oil, acrylic, urethane coating products in that CUTEK® protects your timber from the inside out. CUTEK® penetrates deeply into the wood core upon application, protecting it from the damaging effects of liquid and gas phase water, significantly increasing the service life of your timber. It does this by remaining PERMANENTLY MOBILE inside the wood, migrating to any cut or perforation with a self-healing action. CUTEK penetrates deeply into the wood core upon application, protecting it from the damaging effects of liquid and gas phase water, significantly increasing the service life of the timber. The product does this by migrating to any cut or perforation with a self-healing action.
|
CUTEK® Oil = TRUE PENETRATION AND MIGRATION WITH SELF HEALING |
COMPETING NATURAL OILS / “PENETRATING OILS” = ENCAPSULATING COATING |
CUTEK® Pre-Oiling Solution
To reduce one more process onsite and the hassle of having to apply the protective seal to the timber after the installation, our friends at Simmonds use CUTEK® to pre-oiled timber decking in a controlled manufactured process which coats, dry’s and stacks ready for installation. This can be a time saver and benefit when the weather can be unpredictable, and the timber might be exposed to the elements before you can get to oiling and sealing them.
You may be aware of the wide range of Cutek products available to help you deliver a finished project.
CUTEK® off the shelf products
If pre-oiled timber is not an option, or if you’re trying to restore existing timber decking, then Cutek has a range of products that will match the job:
|
Cutek product recommended |
Condition of the timber |
|
Cutek Restore |
Weathered Sevrely Stained Cleaning required to remove dirt, grease, or grime |
|
Cutek Quickclean |
Previously coated with Cutek New timber uncoated |
|
Cutek Wood Stripper |
Coated with another coating |
When applying CUTEK® on timber species:
- BLACKBUTT: Goldtone, Honeycomb*, Light Oak, Rustic Gold
- CYPRESS: Goldtone, Honeycomb*, Rustic Gold
- MERBAU: Autumntone, Burnt Red, Merbau*, Sela Brown
- TREATED PINE: Goldtone, Honeycomb*, Light Oak
- TALLOWWOOD: Goldtone, Honeycomb*, Rustic Gold
- NSW SPOTTED GUM: Sela Brown, New Bronzetone
- QLD SPOTTED GUM: New Bronzetone, Rustic Gold, Sela Brown
- MIXED WHITES (STRINGYBARK & WHITE MAHOGANY): Goldtone, Honeycomb*, Light Oak, Rustic Gold
- WHITE MAHOGANY: Goldtone, Honeycomb*, Light Oak, Rustic Gold
- GREY IRONBARK: Burnt Red, Walnut
- RED IRONBARK: Burnt Red, Walnut
- TURPENTINE: Sela Brown, New Bronzetone
- MIXED HARDWOOD: New Bronzetone, Rustic Gold, Sela Brown
- SILVERTOP ASH: Goldtone, Honeycomb*, Light Oak
- RED MAHOGANY: Autumntone, Burtn Red
- NORTHERN BOX: Sela Brown, New Bronzetone
- BLUEGUM: Autumntone, Burnt Red
- STRINGYBARK: Goldtone, Honeycomb*, Light Oak, Rustic Gold
To find the best Cutek solution for your project reach out to our team or visit our store.
Note: These colours are an indication only. Colour may vary depending on multiple factors, including application and the condition and species of timber.
*Available by special order