CONNECTOR NAIL 35 X 3.15 GAL 1KG
PER : EA
Code
OSNG
FEATURES
- One-piece design, stronger than regular clouts, as their heads may pop off under load.
- Tapered head for greater strength.
- All Pryda connectors specifying a Pryda Timber Connector Nail have design capacities are in accordance with test results or current, relevant Australian Standards and the Building Code of Australia.
- Pryda products are structurally adequate provided they are designed, installed and used completely in accordance with the Pryda Timber Connector Nail (when specified).
- Correct Installation: Installation of Pryda products must be strictly in accordance with the instructions in the relevant design guide.
Stock Availability
Product Description
Make sure your connection is compliant USES The Pryda Timber Connector Nail is specifically designed for fixing Pryda timber connectors. Where a Pryda product specifies a 35 x 3.15mm galvanised Pryda Timber Connector Nail, be sure to use the genuine product.
FEATURES
- One-piece design, stronger than regular clouts, as their heads may pop off under load.
- Tapered head for greater strength.
- All Pryda connectors specifying a Pryda Timber Connector Nail have design capacities are in accordance with test results or current, relevant Australian Standards and the Building Code of Australia.
- Pryda products are structurally adequate provided they are designed, installed and used completely in accordance with the Pryda Timber Connector Nail (when specified).
- Correct Installation: Installation of Pryda products must be strictly in accordance with the instructions in the relevant design guide.
APPLICATION
For application and design capacity information, refer to the relevant Pryda Design Guide.