90mm PRIMED FJ H3 F7 TREATED PINE

A premium quality timber impregnated with a H3 LOSP treatment for protection against insect attacks and moisture decay, making it ideal for above-ground outdoor use, but equally suitable for any indoor application.

It is manufactured from sustainable plantation grown radiata pine which is milled, kiln dried, finger-jointed for defect-free strength and straightness, then pressure-treated with a light organic solvent preservative (LOSP).

With a smooth, dressed finish, this F7 structurally rated timber comes pre-primed and ready for easy painting. When installing outdoors, all exposed unprimed surfaces resulting from cut ends, mitres, notching, boring, punched nail holes or similar should be re-sealed with a suitable exterior timber primer.

Off-cuts of primed or painted timber should not be burnt, but instead disposed of in council approved landfill or incineration sites. In addition, the sawdust and shavings should not be used for mulch or animal bedding.

• F7 structural rating
• Suitable for exterior, above ground applications
• Pre-primed – requires little or no sanding prior to painting
• H3 treatment makes it termite, borer, rot and fungal resistant
• Manufactured from 100% renewable radiata plantation pine