We know how tight and difficult it is to install connector nails into framing brackets, sometimes hitting our knuckles or fingers & struggling to get into the tight positions. Pryda now have a simple solution that helps save time & pain.
Pryda self drilling screws
The Pryda Timber Connector Screw is specifically designed for fixing Pryda timber connectors. Where a Pryda product specifies Pryda Timber Connector Screw, be sure to use the genuine product.
Product Features
- Colour head with ‘PR’ head marking to easily identify genuine Pryda screw, and visually know the length installed.
- Self-drilling technology for faster installation.
- Compatible with impact drivers.
- Must be used with genuine Pryda Structural Timber Connectors to ensure the design strength of the connection and minimum corrosion protection required by AS 1684-2010.
- All Pryda connectors specifying a Pryda Timber Connector Screw have design capacities are in accordance with test results or current, relevant Australian Standards and the Building Code of Australia.
- Pryda products are structurally adequate provided they are designed, installed and used completely in accordance with the Pryda Timber Connector Screw (when specified).
- Correct Installation: Installation of Pryda products must be strictly in accordance with the instructions in the relevant design guide.
Time Saving
When we look at the more commonly used Joist hangers & compare the amount of Connector nails to screws, you will notice there is a time saving in the installation of Pryda Joist hangers:
Framing Bracket |
Fixing to support beam (A) | Fixing to support beam (B) | |||
Nails | Pryda Screws | Nails | Pryda Screws | ||
FB45120 - PRYDA JOIST HANGER 45MM X 120MM | 12 | 6 | 6 | 4 | |
FB45140 - PRYDA JOIST HANGER 45MM X 140MM | 16 | 6 | 8 | 4 | |
FB45220 - PRYDA JOIST HANGER 45MM X 220MM | 26 | 10 | 12 | 8 |
Application
For application and design capacity information, refer to the relevant Pryda Design Guide