KLEVAKLIP ADJUSTABLE JOIST SUPPORT 2PC
Designed specifically to allow decks to be built over concrete slabs, particularly where ground clearance is limited, the KlevaKlip adjustable joist support is a crafty device. Comprised of a base plate, two vertical bolts and a joist hanger, they are ideal for use over concrete with built-in fall or an irregular surface.
Purpose-built for the application, KlevaKlip adjustable joist supports are quick and easy to use without the need for various packers to achieve a perfectly level deck. They’re an ideal option when the step-down from your door to concrete slab is between 100mm and 220mm, with the height of your deck governed by the length of bolt used. And because the KlevaKlip adjustable joist support ensures joists remain off the concrete, they eliminate the threat of rot through the bottom of the joist.
KlevaKlip adjustable joist supports are designed to accommodate 45mm wide treated pine joists, but can also be used with hardwood joists providing they are screwed into the joist hanger rather than nailed.
- Designed specifically for decks build over concrete slabs with a limited ground clearance
- Produces a perfectly level deck surface without the need for packers
- Height of deck is determined by length of bolts used
- Ideal for concrete slabs with built-in fall
- Quick and easy to use, purpose-built for the application
- Made from galvanised steel
- Joists are suspended off the ground, preventing potential joist rot
- Top of joist height from as little as 86mm
- Joist hanger measures 46mm wide x 100mm long x 65mm high
- Accommodates 45mm wide joists, minimum 70mm high
- Softwood joists can be nailed in joist hanger, hardwood joists must be screwed in place
- Incudes 1 x joist hanger and 1 x base plate
- Each adjustable joist support requires the following (all sold separately):
- 2 x M10 hex head galvanised bolts
- 4 x M10 galvanised nuts
- 2 x M10 flat galvanised washers
- 12mm x 50mm dynabolt or 10mm x 50mm masonry bolt or similar