PRIMED FJ H3 TREATED PINE F7 66X30 5.4M
- Finger-jointed for defect free strength and straightness
- Treated to withstand termites, borer and rot
- Paint coatings are easy to apply and achieve a smooth surface finish
- For above ground use only
- For a better finish and durability, use colours that have a Light reflective Value (LRV) of 45 – 100 (100 being pure white). Colours with a LRV of 44 to 0 can generate extreme surface heat when exposed to direct sunlight resulting in resin bleed, shrinkage, distortion and cracking
A premium quality timber impregnated with a H3 LOSP treatment for protection against insect attacks and moisture decay, making it ideal for above-ground outdoor use, but equally suitable for any indoor application.
It is manufactured from sustainable plantation grown radiata pine which is milled, kiln dried, finger-jointed for defect-free strength and straightness, then pressure-treated with a light organic solvent preservative (LOSP).
With a smooth, dressed finish, this F7 structurally rated timber comes pre-primed and ready for easy painting. When installing outdoors, all exposed unprimed surfaces resulting from cut ends, mitres, notching, boring, punched nail holes or similar should be re-sealed with a suitable exterior timber primer.
Off-cuts of primed or painted timber should not be burnt, but instead disposed of in council approved landfill or incineration sites. In addition, the sawdust and shavings should not be used for mulch or animal bedding.
- 66mm x 30mm finished size
- 5400mm in length
- F7 structural rating
- Strong, durable and defect-free
- A natural timber product, easy to work with
- Suitable for exterior, above ground applications
- Pre-primed – requires little or no sanding prior to painting
- H3 treatment makes it termite, borer, rot and fungal resistant
- Manufactured from 100% renewable radiata plantation pine